Details, Fiction and varget load data

Details, Fiction and varget load data

Blog Article

He mentioned starting off loads for 2400 should be Risk-free with 410 but to view pressures diligently as maximums had been approached and temps drop. I find it Peculiar that Alliant expresses a dilemma and afterwards recommends the way to progress with using it! I'm wondering simply how much 'disclaimer' is from the response?



Hardly ever attempt to use smokeless powder for a substitute for black powder or any other kind of black powder substitute.

In the event you trying to slow the shell all the way down to under 1300fps (why I don't know, because it just causes the pattern to sizzling place center), then 296/H110 will be the best powder, because it will likely have a rather cleaner burn in its place.

Also, be sure you established the crimper nearly crimp on the depth of a few dime, and you should definitely are only a bit taper crimping the hulls.

I take advantage of this powder mainly because it can be a “ball” powder, not a “adhere”. I utilize it in my Dillon XL650. As soon as the powder measure is ready, each toss is accurate inside 0.one grains. It provides incredibly constant ammunition.

If This is certainly your to start with go to, you'll want to look into the FAQ by clicking the link over. You might have to sign up before you decide to can look at more info put up: simply click the register link earlier mentioned to proceed.




I use this powder as it is a “ball” powder, not a “stick”. I utilize it in my Dillon XL650. After the powder evaluate is set, Each and every throw is accurate within just 0.1 grains. It generates splendidly reliable ammunition.

Note: Will not have confidence in the charts!!!! Do several throws with the new bushing inside your equipment and fat the throws to verify you are receiving the appropriate grain drops.

Accurate 1680 uses the best ballistic experts as well as the highest high-quality components collectively to guarantee that every gun is best served with Accurate Powders.

Hence at 1200fps, the 410 with its prolonged and narrow shot column will scorching location center, even though the amplified pace helps the center pellets to fill out the pattern, as an alternative to scorching location centering isntead.

Hope this assists you out. I can be loading the find more information H110 powder for the newer HS hulls. You need to utilize the Get HS wad and Adhere to the loading data on the letter. Quite high chamber pressures in 28 ga. along with the 410 ga. so Will not swap primers or wads with same powder loads like you can within the twelve ga. Doing so can put you over the top with chamber pressures. Good Luck and Break-em all. Jeff

Made by showin




Even though I have never tried it I agree with the pondering with a 4 ball load, seems like precisely the same issue as I previously talked about using a 5 pellet load of OOO buck.

Accurate Powders is actually a company that definitely life as much as its identify. The complete line of smokeless powders for handguns, rifles, and shotguns is engineered and lab-tested to maximize precision and performance.